For through-cutting materials up to a thickness of approx. 3 mm. A spring-loaded glide shoe permits cutting very fine details. Optionally, a fixed glide shoe can be used for cutting at set depths, e.g. when cutting printing or coating blankets. With certain blade types maximum cutting speeds can be attained even when cutting ridgid materials.
Magnetic foil
Polypropylene
Cardboard
Coreplast
Custom magnets
Clear packaging
Shippring boxes
Light-weight boxes
Kiss-cutting tool (KCT)
With variable knife pressure, this tool is ideally suited for kiss-cutting thin materials to a liner. Materials up to 3 mm / 1/8” can be cut – most at maximum speeds. An optional fixed glide shoe is available for cutting materials at set depths, e.g. reflective vinyls.
Decorative vinyl
Masking materials
Reflective materials
Translucent materials
Wrapped spherical sign
Sandblast stencil
Traffic signs
Vehicle wrap
Electrical oscillating tool (EOT)
Ideal for cutting soft and medium-density materials up to 28 mm / 1” thick. Available with 0.5 mm or 1 mm stroke. The former (0.5 mm stroke) is recommended for cutting materials up to 3 mm / 1/8” thickness at maximum speed. The tool with 1mm stroke is recommended for thicker materials.
Foam materials
Corrugated cardboard
Leather
Woven / non- woven materials
3D Lettering
POP displays
Shoes
Felt tote bag
Pneumatic oscillating tool (POT)
In comparison to the electric oscillating tool, the pneumatic (airdriven)oscillating tool is more powerful and therefore designed for cutting denser, tougher, and thicker materials up to 50 mm / 2”.
Sandwich board
Foam
Corrugated cardboard
Rubber
Exhibits
Cushioning materials
Custom packaging
Ejection rubber
Driven rotary tool (DRT)
This tool is designed for cutting fibrous, porous materials, including fabrics, technical textiles, and composites. The driven rotary tool produces a clean cut at maximum speeds.
Mesh
Textiles
Technical textiles
Balloon materials
Building wraps
Feather flags
Aircraft construction
Air dancers
1 kW router
Exceptional speed, productivity, and versatility distinguish the Zünd router. The 1 kW spindle inserts into the routing module and is designed for routing hard, dense materials up to a max. thickness of 26 mm / 1”, softer materials up to 50 mm / 2” thick. Thinner rigid materials (up to 5 mm / 3/16”) can be routed considerably faster than with conventional CNC routers.
Ridgid foam core
Acrylics
Aluminium composites
Wood
3D displays
Acrylic furniture
Exhibits & kiosks
Table plate
V-cut tool (VCT)
The seemingly impossible made nearly commonplace: 3D structural designs with the V-cut tool. This unique tool is ideal for cutting extremely rigid sandwich board materials at 15°, 22.5°, 30°, and 45° angles. Depending on material density, thicknesses of up to 16 mm / 5/8” can be processed.
Sandwich board
Foam composites
X-/Reboard furniture
Brochure holder
Creasing tool type 1 (CTT1)
The crease tool type 1 is designed specifically for creasing multiplewall corrugated card-board and plastic materials up to thicknesses of 7 mm / 1/4”. The large diameter of this type of crease wheel permits creasing of thicker materials cleanly and with considerable down pressure, without breaking or tearing the top sheet.
Corrugated cardboard
Honeycomb materials
Corrugated box
Coroplast box
Creasing tool type 2 (CTT2)
Several creasing wheels in different widths and radii are required for creasing/scoring paper, carton, polypropylene, and PVC materials. A complete set of tools is available for Type 2, ensuring perfect creases in a wide range of commonly used materials.
Polypropylene
Folding carton
Packaging
Dispenser
Universal Drawing Tool (UDT)
The UDT can be used to draw or plot simple text, lines, and marks with a pen or marker. Drawing can occut in any direction/at any angle, in a variety of thicknesses. A variety of tools such as ballpoint, felt tip, and ink pens are available.
Leather
Paper, cardboard
Rubber
Teflon film
Shoes
Patterns, stencils, markers
Insulation
Building wraps
Raster Braille Tool (RBT)
The raster method has emerged as the preferred method for producing tactile Braille signage for the blind and visually impaired. The Braille tool is fully compatible with theG3 Universal Module. The process is quite simple: a router modulé routes the holes, and the Braille tool inserts balls to create raised dots.
Wood
Aluminum
Acrylics
Plastics
Signage for the blind and visually impaired
For further information please do not hesitate to contact us on T: +45 87 80 22 70 or E-mail
