{"id":26408,"date":"2019-01-15T12:49:28","date_gmt":"2019-01-15T11:49:28","guid":{"rendered":"https:\/\/www.zund.dk\/mjukvaror\/cut-it-advanced-cutting-software\/"},"modified":"2025-01-16T10:05:19","modified_gmt":"2025-01-16T09:05:19","slug":"cut-it-advanced-cutting-software","status":"publish","type":"page","link":"https:\/\/www.zund.dk\/sv\/mjukvaror\/cut-it-advanced-cutting-software\/","title":{"rendered":"Cut-it! Advanced Cutting Software"},"content":{"rendered":"

Cut-it<\/span>! <\/span>Advanced Cutting Software<\/span><\/strong><\/h1>\n

Enklare och mer effektivt \u00e4n n\u00e5gonsin! <\/span><\/h2>\n<\/div>
<\/div><\/div><\/div><\/div><\/div><\/div>

\"\"<\/a><\/p>\n

Cut Queue<\/h4>\n<\/div>
<\/div><\/div><\/div>

\"\"<\/a>
\n<\/a><\/p>\n

Media Library<\/h4>\n<\/div>
<\/div><\/div><\/div>

\"\"<\/a><\/p>\n

Editor<\/h4>\n<\/div>
<\/div><\/div><\/div>

\"\"<\/a>
\n<\/a><\/p>\n

Intelligent functionalities<\/h4>\n<\/div>
<\/div><\/div><\/div>

\"\"<\/a>
\n<\/a><\/p>\n

Eye in The Sky<\/h4>\n<\/div>
<\/div><\/div><\/div>

\"\"<\/a><\/p>\n

Robot interface<\/h4>\n<\/div>
<\/div><\/div><\/div>
<\/div>
<\/div>
<\/div>
<\/div>
<\/div>
<\/div>
<\/div><\/div><\/div>
<\/div>
<\/div>
<\/div>

Cut-it styr Z\u00fcnds sk\u00e4rmaskiner genom ett mycket anv\u00e4ndarv\u00e4nligt gr\u00e4nssnitt. Optimal produktionskapacitet uppn\u00e5s genom interaktiva och grafiska ”vad du ser \u00e4r vad du f\u00e5r”-funktioner d\u00e4r alla parametrar kan \u00e4ndras dynamiskt under produktionen utan att beh\u00f6va stoppa och starta om. Sk\u00e4rfiler visas i storlekar relaterade till den faktiska maskinstorleken och bilder p\u00e5 sk\u00e4rmen visar de aktiva verktygen p\u00e5 sk\u00e4rmaskinen. Ett ”verktygsf\u00e4lt” l\u00e4ngst ner p\u00e5 sk\u00e4rmen och ”funktionstangenter” p\u00e5 PC-tangentbordet g\u00f6r det enkelt att st\u00e4lla in och anpassa f\u00f6r genv\u00e4gsfunktioner. <\/p>\n<\/div>

<\/div>
<\/div>
<\/div>
<\/div><\/div><\/div>
<\/span><\/div><\/div>
<\/div><\/div><\/div>

\"\"<\/a><\/p>\n<\/div>

<\/div><\/div><\/div><\/div><\/div><\/div>
<\/span><\/div><\/div>
<\/div><\/div><\/div>

Sk\u00e4rk\u00f6<\/strong><\/span><\/h1>\n

F\u00e5 enkelt en \u00f6verblick \u00f6ver inkommande jobb f\u00f6r att organisera och h\u00e5lla koll p\u00e5 produktionen<\/span><\/h2>\n<\/div>
<\/div><\/div><\/div><\/div><\/div><\/div>
<\/div>
<\/div>
<\/div>
<\/div><\/div><\/div>
<\/div>
<\/div>
<\/div>
<\/span><\/div><\/div>
<\/div>
<\/div>
<\/div>
<\/div><\/div><\/div>
<\/div><\/div><\/div>

Great overview of incoming jobs in the Cut Queue<\/h3>\n

In the Cut Queue you see all incoming jobs. Colored icons illustrate if jobs are ready for cutting or if an operator action is needed. An estimated cut time, based on the actual media settings, is displayed for each job. By selecting multiple jobs, you get a quick overview of the total production time.<\/p>\n

All jobs can be sorted or filtered by material type, customer name, submit date, due date, cut order, etc. for best overview.<\/p>\n

The Cut Queue also allows combining multiple jobs for batch processing.<\/p>\n

Old jobs are kept in a History queue for a certain time for easy access and re-production. In the history queue you also see the actual production time for each job.<\/p>\n<\/div>

<\/div>
<\/div>
<\/div>
<\/div><\/div><\/div>

Compatible with any CAD program<\/h3>\n

Cut-it imports vector files from all leading CAD programs including .DXF, .PDF, .AI, .CF2, .ACM, .SAM, etc.\u00a0Import settings can be customized for automatically matching specific layer names to different tool actions.<\/p>\n

.<\/span><\/p>\n

Simply scan the barcode and Cut<\/h3>\n

Cut-it is compatible with leading RIPs and workflow systems, and can be setup for reading printed barcodes, with a barcode scanner, for easy job identification.<\/p>\n<\/div>

<\/div><\/div><\/div>
<\/div><\/div><\/div>

\"\"<\/a><\/p>\n<\/div>

<\/div><\/div><\/div><\/div><\/div>
<\/span><\/div><\/div>
<\/div><\/div><\/div>

Mediabibliotek<\/span><\/strong><\/h1>\n

T\u00e4nk produktivitet och l\u00e4mna materialkunskapen till Cut-it<\/span>!<\/span> <\/span><\/h2>\n<\/div>
<\/div><\/div><\/div><\/div><\/div><\/div>
<\/div><\/div><\/div>
<\/span><\/div><\/div>
<\/div><\/div><\/div>
<\/div>
<\/div>
<\/div>
<\/div><\/div><\/div>
<\/div><\/div><\/div>

MEDIA LIBRARY<\/h3>\n

Cut-it includes a large media library with predefined parameters for commonly used materials. Don\u2019t worry about cutting speed, acceleration, creasing power, v-cut depth, routing RPM, etc. Simply open the cut file and select media – all cut parameters are preset according to the individual tool selection.<\/p>\n

Additional medias can easily be imported, created or customized by yourself whenever needed.<\/p>\n

Job parameters can be saved temporarily to the specific job or generally to the media for all new jobs.<\/p>\n

For graphic applications, in combination with Prepare-it, the medias further include a complete set of \u201cprepress\u201d settings for register marks, barcodes, nesting etc.<\/p>\n

Cut-it users can customize the media library by displaying, creating, duplicating and downloading just those medias that are relevant for them.<\/p>\n<\/div>

<\/div><\/div><\/div>

\"\"<\/a><\/p>\n<\/div>

<\/div><\/div><\/div><\/div><\/div>
<\/span><\/div><\/div>
<\/div><\/div><\/div>

Ta n\u00e4sta steg!<\/strong><\/span><\/h1>\n

Upplev enkel och exakt redigering \u2013 genv\u00e4gen till produktivitet och ett f\u00f6renklat arbetsfl\u00f6de! <\/span><\/span><\/h2>\n<\/div>
<\/div><\/div><\/div><\/div><\/div><\/div>
<\/span><\/div><\/div><\/div><\/div>
<\/div><\/div><\/div><\/div><\/div>
<\/span><\/div><\/div><\/div>
<\/div><\/div><\/div>

EDITOR<\/h3>\n

DEDICATED TOOLS MAKE CUTTING EASY AND ACCURATE<\/h4>\n

Cut-it includes numerous dedicated features to improve cutting and thereby the end product. A user-friendly Adobe like editor allows the operator to make last-minute changes of the cut paths – including editing curve points, moving start points, job scaling, creating offset, creating new curves, etc.<\/p>\n

More advanced features for routing and cutting can be applied when needed.<\/p>\n<\/div><\/div><\/div>

<\/div><\/div><\/div>

\"\"<\/a><\/p>\n<\/div>

<\/div><\/div><\/div><\/div><\/div>
<\/span><\/div><\/div>
<\/div><\/div><\/div>

F\u00e5 perfekt kontroll!<\/span><\/strong><\/span><\/h1>\n

Cut-it g\u00f6r det enkelt att arbeta smartare med intelligenta funktioner!<\/span><\/h2>\n<\/div>
<\/div><\/div><\/div><\/div><\/div><\/div>
<\/div>
<\/div>
<\/div>
<\/div><\/div><\/div>
<\/div><\/div><\/div>

Smart feed<\/h3>\n

Smart Feed can be activated to ensure optimal cut quality on roll jobs. By allowing feeding in smaller steps all parts smaller than the cut area will be cut in one continuous cut. Only parts longer than the cutter will be split and cut in multiple sequences.<\/p>\n<\/div><\/div><\/div>

<\/div><\/div><\/div>
<\/span><\/div>
<\/div><\/div><\/div>
<\/div><\/div><\/div>
<\/div>
<\/div>
<\/div>
<\/div><\/div><\/div><\/div><\/div>
<\/div><\/div><\/div>
<\/span><\/div><\/div>
<\/div><\/div><\/div>

High precision cutter with cameraguided registration!<\/h3>\n

Using the ICC camera detect register marks, the vision module ensures perfect cut-to-print accuracy. Based on the detection, the system automatically positions and rotates the cut information according to the printed material positioned on the cutter.<\/p>\n

Perfect fit for distorted jobs<\/h3>\n

Different compensation modes can be selected depending if the cut must be scaled, skewed or shrunk according to the print or if it must be cut 1:1 with best possible positioning.<\/p>\n

Perfect fit for jobs longer than the cutter<\/h3>\n

When cutting large printed banners longer than the cutter the Vision module ensures perfect alignment for the end- and start points of the cutline.<\/p>\n

Perfect fit for backside cutting<\/h3>\n

Different registration methods are available for accurate cutting of printed sheets from the backside.
\nEdge detection and reading cutouts are both possible with the ICC Camera.<\/p>\n<\/div><\/div><\/div>

<\/div><\/div><\/div><\/div><\/div>
<\/div>
<\/div>
<\/div>
<\/div><\/div><\/div>
<\/div><\/div><\/div>

Intelligent vacuum hold-down<\/h3>\n

Cut-it automatically adjusts the vacuum area on the Z\u00fcnd cutter according to the job being processed.\u00a0<\/span><\/p>\n

Depending on the cutter configuration, the vacuum width can be controlled from left and right side as well as front and rear. Also, the vacuum level can be automatically controlled based on media type.<\/p>\n<\/div><\/div><\/div>

<\/div><\/div><\/div>
<\/span><\/div>
<\/div><\/div><\/div>
<\/div><\/div><\/div><\/div><\/div>

\"\"<\/a><\/p>\n<\/div>

<\/div><\/div><\/div><\/div><\/div>
<\/span><\/div><\/div>
<\/div><\/div><\/div>

Frig\u00f6r mera tid!<\/span><\/strong><\/h1>\n

Eye in the Sky f\u00f6rnyar sk\u00e4rprocessen – och ger en anm\u00e4rkningsv\u00e4rd inverkan p\u00e5 produktionskapaciteten<\/span><\/h2>\n<\/div>
<\/div><\/div><\/div><\/div><\/div><\/div>
<\/div>
<\/div>
<\/div>
<\/div><\/div><\/div>
<\/div><\/div><\/div>

Eye in the Sky<\/h3>\n

With just one click EIS automatically identifies and starts processing all jobs placed on the cutter. You can even place different jobs on different materials on the cutter and proces them at the same time.\u00a0<\/span><\/p>\n

Place multiple jobs on the cutter – no need to open or batch different files together. EIS will detect unique fiducials, printed on each job, to identify material, cutting parameters and positioning on the cutter. \u00a0<\/span><\/p>\n

This simplified interaction will save time and allow the operator to do other things during the cutting process.\u00a0<\/span><\/p>\n<\/div>

<\/div>
<\/div>
<\/div>
<\/span><\/div><\/div><\/div>
<\/div><\/div><\/div>

Advantages:<\/h3>\n

\u2022 Highest flexibility<\/p>\n

\u2022 Save time<\/p>\n

\u2022 Maximize cutter capacity<\/p>\n

\u2022 Cut different jobs together<\/p>\n

\u2022 Mix substrates<\/p>\n

\u2022 Automate cutting<\/p>\n<\/div><\/div><\/div>

<\/div><\/div><\/div>
<\/div>
<\/div>
<\/div>
<\/div><\/div><\/div><\/div><\/div>
<\/div>
\"\"<\/div><\/a><\/div><\/div>
\"\"<\/div><\/a><\/div><\/div>
\"\"<\/div><\/a><\/div><\/div>
\"\"<\/div><\/a><\/div><\/div>
\"\"<\/div><\/a><\/div><\/div><\/div><\/div><\/div><\/div>
<\/div><\/div><\/div><\/div><\/div>
<\/div>
<\/div>
<\/div>
<\/div><\/div><\/div>
<\/div><\/div><\/div>
<\/a><\/span><\/div>
<\/div>
<\/div>
<\/div>

Productivity do not only depend on processing speed. Factors like job shift including material handling and\u00a0 <\/span>file loading, have a remarkable impact on production throughput. With EIS the machine automatically identifies jobs and starts cutting – allowing the machine to process unattended for longer periods of time.<\/em><\/p>\n<\/div>

<\/div><\/div><\/div>

Full flexibility with different production modes<\/h3>\n

Keep the cutter going whether cutting rigid boards or flexible materials from roll. Different production modes can be selected for single-zone, double-zone and continuous production.\u00a0<\/span><\/p>\n

In single-zone production the operator can fill up the cutting area with different jobs on different substrates, click and leave. Ideal when working with small sheets as you really benefit from filling up the cutting area allowing the machine to operate unattended for longer periods.<\/p>\n

In double-zone production the system runs in tandem mode. The operator can fill up one end of the machine as it is cutting in the other end and vice versa. In this way the machine is constantly working. Jobs and substrates can be mixed for maximum flexibility.<\/p>\n

In continuous production mode a conveyor system on the machine automatically advances the next job when the previous job is finished – whether coming from roll or loaded as sheets.<\/p>\n

EIS is also compatible with automation systems such as sheet feeders, robots, etc.<\/p>\n<\/div><\/div><\/div>

<\/div><\/div><\/div>
<\/div>
<\/div>
<\/div>
<\/div><\/div><\/div><\/div><\/div>
<\/div>
<\/div>
<\/div>
<\/div><\/div><\/div>
<\/div><\/div><\/div>

One-shot camera registration for high speed operation<\/h3>\n

Let EIS detect the register marks and reduce time for camera registration. EIS can detect both fiducials and register marks in one single shot so job identification and job positioning are detected in seconds, and the cutting starts.<\/p>\n

For jobs requiring maximum precision EIS can be used for detecting fiducials only while the ICC camera detects the register marks.<\/p>\n<\/div><\/div><\/div>

<\/div><\/div><\/div>
<\/a><\/span><\/div>
<\/div><\/div><\/div><\/div><\/div>

\"\"<\/a><\/p>\n<\/div>

<\/div><\/div><\/div><\/div><\/div>
<\/span><\/div><\/div>
<\/div><\/div><\/div>

Samarbeta med framg\u00e5ng!<\/strong><\/span><\/h1>\n

Automatisera med robotar \u2013 och t\u00e4nj p\u00e5 gr\u00e4nserna f\u00f6r din produktion!<\/span><\/h2>\n<\/div>
Mer om robotautomatisering h\u00e4r…<\/span><\/a><\/div>
<\/div><\/div><\/div><\/div><\/div><\/div>
<\/span><\/div><\/div><\/div><\/div><\/div>
<\/div>
<\/div>
<\/div>
<\/div><\/div><\/div>
<\/div><\/div><\/div>
<\/a><\/span><\/div>
<\/div>
<\/div>
<\/div>
<\/div><\/div><\/div>

Robot interface<\/h3>\n

Use Cut-it for connecting robots to the Z\u00fcnd cutter for loading and unloading. Different setups can be defined depending on type of robot and gripper. Cut-it works with large industrial robots and small collaborative robots with vacuum plate for picking whole sheets or suction cups for picking individual parts.
\n.<\/span><\/p>\n

No manual setup<\/h3>\n

The Cut-it robot module includes dynamic unloading. No setup for the individual jobs is required. Cut-it automatically defines the pick position of each part and sends it to the robot.<\/p>\n

Based on the size and shape of the parts, Cut-it also decides the number of suction cups to be used for picking the parts. Multiple parts can also be unloaded together, when using grippers with multiple suction cups.<\/p>\n<\/div><\/div><\/div>

<\/div><\/div><\/div><\/div><\/div>

\"\"<\/a><\/p>\n<\/div>

<\/div><\/div><\/div><\/div><\/div>

Ladda ner v\u00e5r broschyr…<\/h2>\n<\/div>
<\/div>
<\/div>
<\/div>
<\/div><\/div><\/div>
<\/div><\/div><\/div>
<\/a><\/span><\/div><\/div>
<\/div><\/div><\/div><\/div><\/div><\/div><\/p>\n","protected":false},"excerpt":{"rendered":"","protected":false},"author":1,"featured_media":0,"parent":26079,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"100-width.php","meta":{"_acf_changed":false,"footnotes":""},"class_list":["post-26408","page","type-page","status-publish","hentry"],"acf":[],"yoast_head":"\nCut-it! Advanced Cutting Software - Zund Skandinavien ApS<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.zund.dk\/sv\/mjukvaror\/cut-it-advanced-cutting-software\/\" \/>\n<meta property=\"og:locale\" content=\"sv_SE\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Cut-it! Advanced Cutting Software - Zund Skandinavien ApS\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.zund.dk\/sv\/mjukvaror\/cut-it-advanced-cutting-software\/\" \/>\n<meta property=\"og:site_name\" content=\"Zund Skandinavien ApS\" \/>\n<meta property=\"article:modified_time\" content=\"2025-01-16T09:05:19+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.zund.dk\/wp-content\/uploads\/2019\/01\/Zund_cut-queue_symbol.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"591\" \/>\n\t<meta property=\"og:image:height\" content=\"591\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Ber\u00e4knad l\u00e4stid\" \/>\n\t<meta name=\"twitter:data1\" content=\"22 minuter\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.zund.dk\\\/sv\\\/mjukvaror\\\/cut-it-advanced-cutting-software\\\/\",\"url\":\"https:\\\/\\\/www.zund.dk\\\/sv\\\/mjukvaror\\\/cut-it-advanced-cutting-software\\\/\",\"name\":\"Cut-it! Advanced Cutting Software - Zund Skandinavien ApS\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.zund.dk\\\/sv\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.zund.dk\\\/sv\\\/mjukvaror\\\/cut-it-advanced-cutting-software\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.zund.dk\\\/sv\\\/mjukvaror\\\/cut-it-advanced-cutting-software\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.zund.dk\\\/wp-content\\\/uploads\\\/2019\\\/01\\\/Zund_cut-queue_symbol.jpg\",\"datePublished\":\"2019-01-15T11:49:28+00:00\",\"dateModified\":\"2025-01-16T09:05:19+00:00\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.zund.dk\\\/sv\\\/mjukvaror\\\/cut-it-advanced-cutting-software\\\/#breadcrumb\"},\"inLanguage\":\"sv-SE\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.zund.dk\\\/sv\\\/mjukvaror\\\/cut-it-advanced-cutting-software\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"sv-SE\",\"@id\":\"https:\\\/\\\/www.zund.dk\\\/sv\\\/mjukvaror\\\/cut-it-advanced-cutting-software\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.zund.dk\\\/wp-content\\\/uploads\\\/2019\\\/01\\\/Zund_cut-queue_symbol.jpg\",\"contentUrl\":\"https:\\\/\\\/www.zund.dk\\\/wp-content\\\/uploads\\\/2019\\\/01\\\/Zund_cut-queue_symbol.jpg\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.zund.dk\\\/sv\\\/mjukvaror\\\/cut-it-advanced-cutting-software\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.zund.dk\\\/sv\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"MJUKVAROR\",\"item\":\"https:\\\/\\\/www.zund.dk\\\/sv\\\/mjukvaror\\\/\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Cut-it! Advanced Cutting Software\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.zund.dk\\\/sv\\\/#website\",\"url\":\"https:\\\/\\\/www.zund.dk\\\/sv\\\/\",\"name\":\"Zund Skandinavien ApS\",\"description\":\"Cutting, plotting and routing\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.zund.dk\\\/sv\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.zund.dk\\\/sv\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"sv-SE\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.zund.dk\\\/sv\\\/#organization\",\"name\":\"Z\u00fcnd Skandinavian\",\"url\":\"https:\\\/\\\/www.zund.dk\\\/sv\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"sv-SE\",\"@id\":\"https:\\\/\\\/www.zund.dk\\\/sv\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.zund.dk\\\/wp-content\\\/uploads\\\/2019\\\/06\\\/zund_retina.png\",\"contentUrl\":\"https:\\\/\\\/www.zund.dk\\\/wp-content\\\/uploads\\\/2019\\\/06\\\/zund_retina.png\",\"width\":366,\"height\":123,\"caption\":\"Z\u00fcnd Skandinavian\"},\"image\":{\"@id\":\"https:\\\/\\\/www.zund.dk\\\/sv\\\/#\\\/schema\\\/logo\\\/image\\\/\"}}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Cut-it! Advanced Cutting Software - Zund Skandinavien ApS","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.zund.dk\/sv\/mjukvaror\/cut-it-advanced-cutting-software\/","og_locale":"sv_SE","og_type":"article","og_title":"Cut-it! Advanced Cutting Software - Zund Skandinavien ApS","og_url":"https:\/\/www.zund.dk\/sv\/mjukvaror\/cut-it-advanced-cutting-software\/","og_site_name":"Zund Skandinavien ApS","article_modified_time":"2025-01-16T09:05:19+00:00","og_image":[{"width":591,"height":591,"url":"https:\/\/www.zund.dk\/wp-content\/uploads\/2019\/01\/Zund_cut-queue_symbol.jpg","type":"image\/jpeg"}],"twitter_card":"summary_large_image","twitter_misc":{"Ber\u00e4knad l\u00e4stid":"22 minuter"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/www.zund.dk\/sv\/mjukvaror\/cut-it-advanced-cutting-software\/","url":"https:\/\/www.zund.dk\/sv\/mjukvaror\/cut-it-advanced-cutting-software\/","name":"Cut-it! Advanced Cutting Software - Zund Skandinavien ApS","isPartOf":{"@id":"https:\/\/www.zund.dk\/sv\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.zund.dk\/sv\/mjukvaror\/cut-it-advanced-cutting-software\/#primaryimage"},"image":{"@id":"https:\/\/www.zund.dk\/sv\/mjukvaror\/cut-it-advanced-cutting-software\/#primaryimage"},"thumbnailUrl":"https:\/\/www.zund.dk\/wp-content\/uploads\/2019\/01\/Zund_cut-queue_symbol.jpg","datePublished":"2019-01-15T11:49:28+00:00","dateModified":"2025-01-16T09:05:19+00:00","breadcrumb":{"@id":"https:\/\/www.zund.dk\/sv\/mjukvaror\/cut-it-advanced-cutting-software\/#breadcrumb"},"inLanguage":"sv-SE","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.zund.dk\/sv\/mjukvaror\/cut-it-advanced-cutting-software\/"]}]},{"@type":"ImageObject","inLanguage":"sv-SE","@id":"https:\/\/www.zund.dk\/sv\/mjukvaror\/cut-it-advanced-cutting-software\/#primaryimage","url":"https:\/\/www.zund.dk\/wp-content\/uploads\/2019\/01\/Zund_cut-queue_symbol.jpg","contentUrl":"https:\/\/www.zund.dk\/wp-content\/uploads\/2019\/01\/Zund_cut-queue_symbol.jpg"},{"@type":"BreadcrumbList","@id":"https:\/\/www.zund.dk\/sv\/mjukvaror\/cut-it-advanced-cutting-software\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.zund.dk\/sv\/"},{"@type":"ListItem","position":2,"name":"MJUKVAROR","item":"https:\/\/www.zund.dk\/sv\/mjukvaror\/"},{"@type":"ListItem","position":3,"name":"Cut-it! Advanced Cutting Software"}]},{"@type":"WebSite","@id":"https:\/\/www.zund.dk\/sv\/#website","url":"https:\/\/www.zund.dk\/sv\/","name":"Zund Skandinavien ApS","description":"Cutting, plotting and routing","publisher":{"@id":"https:\/\/www.zund.dk\/sv\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.zund.dk\/sv\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"sv-SE"},{"@type":"Organization","@id":"https:\/\/www.zund.dk\/sv\/#organization","name":"Z\u00fcnd Skandinavian","url":"https:\/\/www.zund.dk\/sv\/","logo":{"@type":"ImageObject","inLanguage":"sv-SE","@id":"https:\/\/www.zund.dk\/sv\/#\/schema\/logo\/image\/","url":"https:\/\/www.zund.dk\/wp-content\/uploads\/2019\/06\/zund_retina.png","contentUrl":"https:\/\/www.zund.dk\/wp-content\/uploads\/2019\/06\/zund_retina.png","width":366,"height":123,"caption":"Z\u00fcnd Skandinavian"},"image":{"@id":"https:\/\/www.zund.dk\/sv\/#\/schema\/logo\/image\/"}}]}},"_links":{"self":[{"href":"https:\/\/www.zund.dk\/sv\/wp-json\/wp\/v2\/pages\/26408","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.zund.dk\/sv\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.zund.dk\/sv\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.zund.dk\/sv\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.zund.dk\/sv\/wp-json\/wp\/v2\/comments?post=26408"}],"version-history":[{"count":14,"href":"https:\/\/www.zund.dk\/sv\/wp-json\/wp\/v2\/pages\/26408\/revisions"}],"predecessor-version":[{"id":34069,"href":"https:\/\/www.zund.dk\/sv\/wp-json\/wp\/v2\/pages\/26408\/revisions\/34069"}],"up":[{"embeddable":true,"href":"https:\/\/www.zund.dk\/sv\/wp-json\/wp\/v2\/pages\/26079"}],"wp:attachment":[{"href":"https:\/\/www.zund.dk\/sv\/wp-json\/wp\/v2\/media?parent=26408"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}